Poly 90 Base Concrete Coat and Flake

In this video we demonstrate how to apply a base coat with our poly 90 system. Poly 90 is a 2 component polyaspartic product. We’re applying a base coat for our one day flake system. We’ve already prepped the mock…

Poly 90 Base Concrete Coat and Flake

Source

0
(0)

In this video we demonstrate how to apply a base coat with our poly 90 system. Poly 90 is a 2 component polyaspartic product. We’re applying a base coat for our one day flake system. We’ve already prepped the mock up area and as you can see it is bone dry which is what we call a total white out. A mock up area is a very important thing to do so that you know how to work with the material. If you’re doing this for a client you can show them what the color and texture will look like.

We use equal parts A and B of our Poly 90 product. We use a medium gray color pack for the purposes of this video. We pour a bit of the medium gray color into the A side and mix it for about a minute. We then combine our A and B and mix them together. Our Ratio on A to B is 1:1 and you want to get as close to that as possible. We mix the product for about a minute and we do this mechanically with a paddle attached to a drill which is our recommended method for mixing product. It’s also a good idea to have a mixing station with a piece of cardboard or other material so that you don’t end up dripping the product onto the floor.

Our Poly 90 product has a bucket life of up to 45 minutes providing you with a much longer work time than most other products. Once the product is applied to the floor you have about ten to twenty minutes of work time depending on ambient temperature. Poly 90 is also a very low VOC and low odor product.

The first thing you’ll want to do is put on spiked shoes and use a chip brush to cut in the edges. For a job like this you’ll want at least two people. One person will be mixing the product and broadcasting the flake while the other person applies the coating. We use a 9 inch roller for this mock up area but for a larger area you’ll want to use an 18 inch roller.
You want to wet out your roller and apply the product to the floor. With this being a full flake system, minor imperfections in the floor will be hidden nicely. Once you roll the product out onto the floor you’ll have about ten minutes to get the flakes into it. Roll the product out onto the floor and have your partner broadcast the flake onto the floor. Don’t dump the flake out but instead try to spread it out with multiple, even broadcasts. You want to start higher and go lower. Imagine that you’re feeding chickens and try to get 100% coverage. After you feel like you’ve got 100% coverage you’ll want to look for wet spots and fill them in with flakes.
Let the product sit for about two to three hours until it’s dry and then you can apply the final coat.

This is the base coat and flake of the Poly 90 one day system!

Follow the links below to view descriptions of the products seen in this video and to purchase directly from our website.

Poly-90 Low Odor is a super low odor polyaspartic polyurea ideal for spaces where time and odor is of great concern.

https://concretefloorsupply.com/shop/poly-90/

Pigments our “Poly” (Poly 80, 80 Slow, 90, and Poly 100) into a solid color.

https://concretefloorsupply.com/shop/aspartic-pigment/

The Encore 10-Quart mixing bucket is a plastic pail with wire handle which is safe to use with all paints, pastes, and adhesives such as epoxies.

https://concretefloorsupply.com/shop/10qt-mix-n-measure-pail-handle/

The Encore 5-Quart mixing bucket is a plastic pail with wire handle which is safe to use with all paints, pastes, and adhesives such as epoxies.

https://concretefloorsupply.com/shop/5qt-mix-n-measure-pail-with-handle/

These Vista Paint plastic bucket containers are solvent resistant and safe for use with all paints, pastes and adhesives; such as epoxies, polyurethanes and more.

https://concretefloorsupply.com/shop/1qt-mix-n-measure-plastic-container/

Used to mix paints and epoxies. Can be used in up to a 5 gallon bucket. All of our two component coating products require mechanically mixing for at least 2 minutes. This mixing paddle attaches to any drill.

https://concretefloorsupply.com/shop/paint-mixer/

Chip brush is great for edging your epoxy around walls, drains and other objects you need to cut in around. Economically priced and can be thrown away when done.

https://concretefloorsupply.com/shop/chip-brush/

Polypropylene spiked shoes with 3/4″ inch spikes come with a Quick-release snap-buckle strap system. They are a must when installing resinous flooring systems

https://concretefloorsupply.com/shop/epoxy-spiked-shoes/

We package our flake chips in several sizes to fit light, medium and full broadcast in 100% solids epoxy floor coatings.

https://concretefloorsupply.com/epoxy-floor-chips/

Roller Cover 18″ 3/8″ Nap

https://concretefloorsupply.com/shop/roller-cover-18-38-nap/

Adjustable Roller Frame 12″ to 18″

https://concretefloorsupply.com/shop/18-roller-frame/

Aluminum Handle utilizes the turn and lock adjustment method for easy use.

https://concretefloorsupply.com/shop/aluminum-extension-handle/

0 / 5. 0

Leave a Reply